GE GPF525C Instalační manuál stáhnout pdf (Strana 2)

STEP 1: CUT 1/4" THICK CUSTOM PANELS TO SIZE

• Cut door panel to the dimensions shown.

NOTE: The trim provided will conceal the cut edges of the

panels.

STEP 2: REMOVE TOEKICK ASSEMBLY

• Make sure electrical power to the dishwasher is turned off.

• Remove the two toekick panel screws and toekick panel. Set

them aside for use in Step 6.

NOTE: Do not remove the insulation behind the toekick.

























INSTALLATION OPTIONS

This trim kit is designed to accommodate 1/4" thick panels.

A raised panel screwed or glued to 1/4" thick backing can be

used. The raised portion of the panel must be fabricated to

permit clearances for the trim on all sides.

A 3/4” thick custom panel may be installed by routing the top

and sides to 1/4" thickness.































1 2 3 4

Komentáře k této Příručce

Žádné komentáře

GE GPF525C Instalační manuál Strana 2

Komentáře k této Příručce

Související produkty a manuály pro ne GE GPF525C