GE BL Series Instalační příručka Strana 1

Procházejte online nebo si stáhněte Instalační příručka pro ne GE BL Series. GE BL Series Installation Guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 6
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
GE
Lighting Solutions
imagination at work
(BL42, BL44 and BL45 Series)
Features
• Long life (50,000 hour rated life)
• 5 year warranty
• Dry location rated
Lumination
TM
LED Luminaires
Installation Guide
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Save These Instructions
Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
WARNING/AVERTISSEMENT
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC and local codes.
• Use only UL approved wire for input/output connections.
Minimum size 18 AWG (0.75mm
2
).
• Type IC, inherently protected.
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l’alimentation avant d’’inspecter, installer ou déplacer le luminaire.
• Assurez-vous de correctement mettre à la terre le boîtier d’alimentation électrique.
RISQUES D’INCENDIE
• Respectez tous les codes NEC et codes locaux.
• N’utilisez que des ls approuvés par UL pour les entrées/sorties de
connexion. Taille minimum 18 AWG (0.75mm
2
).
• Type IC, protection inhérente.
Provided in the package are:
• Luminare
• Universal mounting bracket (4 pieces)
• M3x12mm screws for mounting bracket installation (8 pieces)
• M3 wingnut (8 pieces)
• Ceiling grid safety screw for grid and bracket xing (4 pieces)
• Primary diffuser
• Optional low glare diffuser with protective lm
Tools and components required:
• For end cover install: Philips headed screwdriver
• Rigid (RMC) or exible (FMC) metal conduit for supply connection
• UL/cUL approved twist-on-wire connectors, min. 18 AWG
• UL/cUL approved conduit ttings for 1/2” conduit trade
size (2 pieces)
Zobrazit stránku 0
1 2 3 4 5 6

Shrnutí obsahu

Strany 1 - LED Luminaires

GELighting Solutionsimagination at work(BL42, BL44 and BL45 Series)Features• Long life (50,000 hour rated life)• 5 year warranty• Dry location ratedLu

Strany 2 - Prepare Electrical Wiring

23A 3BRemove end cover closest to the cable glands. Retain star washer for reinstalling end cover.Two diffusers: Slide both diffusers into base of lum

Strany 3 - Electrical Connections

Wiring for Lutron ControllerLutron dimming wires3Optional: If using a dimmer, connect black and red wires of the dimming line to the PSU dimming wires

Strany 4 - Luminaire Installation

Wiring DiagramsFollow diagram A for 1-10V, diagram B for DALI or diagram C for Lutron dimming. At output side of LED driver, make appropriate connecti

Strany 5

5For added safety, use additional celing grid screws to permanently x bracket to grid. 2413Fasten mounting brackets over screws by using two M3 wingn

Strany 6 - IND034-051713

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interf

Komentáře k této Příručce

Žádné komentáře