GE ABHG Instalační příručka

Procházejte online nebo si stáhněte Instalační příručka pro ne GE ABHG. GE ABHG Installation Guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 3
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
GE
Lighting Solutions
Installation Guide
imagination at work
Modular High & Low Bay Lighting
ABHG-Series CE
Albeo
TM
LED Luminaire
WARNING
RISK OF ELECTRIC SHOCK
Turn power off before inspection, installation
or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all local codes.
• Use only IEC approved wire for input/output
connections. Minimum size 18 AWG (0,75mm
2
).
Save These Instructions
Use only in the manner intended by the manufacturer.
If you have any questions, contact the manufacturer.
Prepare Electrical Wiring
Electrical Requirements
• The LED luminaire must be connected to the mains
supply according to its ratings on the product label.
Use an input cord with 3 conductors each with a
cross-section between 1,5mm
2
and 2,5mm
2
of type
HD-21 or HD-22.
• Suitable for use indoors.
Grounding Instructions
• The grounding and bonding of the overall system
shall be done in accordance to local electric code of
the country where the luminaire is installed.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Zobrazit stránku 0
1 2 3

Shrnutí obsahu

Strany 1 - LED Luminaire

GELighting SolutionsInstallation Guideimagination at workModular High & Low Bay LightingABHG-Series CEAlbeoTM LED Luminaire WARNINGRISK OF ELECTRI

Strany 2 - Luminaire Installation

Carefully unpack unit and properly inspect for defects before installing. Wear work gloves to prevent dirt and oil from being transferred to the lumin

Strany 3 - Troubleshooting

ALB007-020514TroubleshootingSymptom SolutionLuminaire will not turn on. • Check that the color of the supply side wires match the color of the wires t

Komentáře k této Příručce

Žádné komentáře