
Wireless Door ChimeUser’s Manual19230Thank you on your purchase of the Wireless Door Chime. Before installation, please read this manual carefully and
Required Tools• Flathead screwdriver• Drill• 1/16” drill bit• 5/32” drill bit• Phillips screwdriverIncluded Hardware: • 2 – Plastic anchors• 4 – Screw
Linking the Push Button to the Chime Unit:1. Switch the Chime power to the “ON” position. The red LED will begin blinking slowly.2. Within 10 secon
Installation using the provided screws:1. Remove the old push button and use this location to install your new Push Button.2. Remove the battery cov
5. Press the Push Button on to the back cover by inserting the top of the Push Button onto the top of the back cover first and then pressing on the bo
Chime Template
Troubleshooting:1. Make sure the batteries are installed according to the polarity markings inside the battery compartment on the Chime Unit.2. Make
11/30/09 is a trademark of the General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma
Komentáře k této Příručce