Ge 51209 GE Wireless Motion-Sensing Alarm with Progra Uživatelský manuál

Do not use in wet locationsPersonal SecurityMotion Sensorwith KeypadUser Manual

10sounded to deactivate. NOTE: To test, a cloth can be used to cover the alarm to reduce risk of hearing damage.Incorrect Code If an incorrect code is

11Deactivating the Chime: To deactivate the chime, slide the switch to ALARM. TESTING MOTION SENSOR OPERATIONSet alarm to CHIME mode; the chime will

12WARNINGLimitations of Alarm ProductsThis product should be tested periodically to make sure it is working properly. The product, if used properly, m

13WARNINGRisk of personal injury• Prolonged exposure to alarm siren may cause permanent hearing lossBattery Warning• Remove batteries before storing t

14NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These l

Motion Sensing AlarmWith Remote ControlLow Battery Indicator The Motion Sensing Alarm has a low battery indicator light. When the batteries need to b

4INSTALLING BATTERIES The battery compartment is located on the back of the unit. Remove the battery compartment screw and slide off cover in the dire

5CREATING YOUR PERSONAL ALARM CODE The 4-digit keypad allows you to set a personal code for arming and disarming the alarm.Remove the battery compartm

6flexibility to aim the motion sensor in a particular direction. Choose your desired location, such as the corner of the room. This will provide maximu

7Secure ball and socket mount to the wall using either the provided wall anchors or by screwing directly into a wall stud. Once installed securely on

8Slide switch to ALARM mode.Arming the AlarmArm the alarm by pressing your 4-digit code. A beep will sound after each button is pressed. When the 4-di

9in 30 seconds. The siren will sound for 30 seconds (unless disarmed by the remote) and then turn off. In 15 seconds the alarm will check for motion.