GE JVW5361SJSS Manuál s instrukcemi stáhnout pdf (Strana 8)

31-10983

FINISH THE INSTALLATION

1. For recirculation installation only: Attach the

CHARCOAL FILTERS (not included) to both sides

of the blower. To do this, place the side of the

charcoal filter with the tabs against the side

of the blower. Align the double lines on the

charcoal filter with the "unlocked" symbol on

the blower. Push and twist downward until the

double lines align with the "locked" symbol on

the blower. Repeat on other side with second

filter.

For recirculation and ducted installation:

2. Replace the grease filters.

FINISH THE INSTALLATION

(Continued)

3. Using a flathead screwdriver, lift up the tabs on

the top of the canopy.

4. To install the lower duct cover:

• Use a flat head screwdriver to push the

two tabs forward on the lower duct cover.

• Angle the duct cover to slide the tabs

under the ledge of the hood body. Seat the

back of the duct cover on the top of the

range hood between the edges and tabs.

5. Turn the power supply on. Turn on blower

and light. If the range hood does not operate,

check that the circuit breaker is not tripped

or the house fuse blown. If the unit still does

not operate, disconnect the power supply and

check that the wiring connections have been

made properly.

ELECTRICAL CONNECTION

1. Connect the Power Supply Cable to the range

hood. Attach the white lead of the power supply

to the white lead of the range hood (A) with a

wire nut (C). Attach the black lead of the power

supply to the black lead of the range hood

(B) with a wire nut (C). Connect the green (D)

ground wire under the green grounding screw.

2. Replace the junction box cover.

Installation Instructions

INSTALLATION INSTRUCTIONS

Tabs

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Komentáře k této Příručce

Žádné komentáře

GE JVW5361SJSS Manuál s instrukcemi Strana 8

Komentáře k této Příručce

Související produkty a manuály pro Odsavače par GE JVW5361SJSS